Skip to main content

Strip Ceiling

Strip Ceiling DML 85L Type

  • UNIQUE PANELS DESIGN
  • HYGIENE & TOUCH DESIGN
  • INNOVATIVE DECORATIVE EFFECT

PRODUCT DESCRIPTION OF STRIP CEILING

(DML85L, DML85L/U, DML85L/B)

  • C profile panel
  • Light weight clip on carrier system
  • Durable with minimum maintenance required
  • Applicable for both interior & external designs (only avail.for DML85L/B, DML85L/U)
  • Available for both louvres cladding & strip ceiling designs. (only avail.for DML85L)
  • Available in aluminium & aluzine finishes
  • As per DML polyester coated colours

MATERIAL SPECIFICATION

  • DML 85L

    Panel Size 85mm effective width
    (carrier to be mounted on to steel aluminium frame (to be supplied by others) to hold panels spacing at 1200mm c/c maximum)
    Thickness 0.4mm aluzinc panel
    (gross wt: 4.1 kg/m2)0.5mm aluminium panel
    (gross wt: 1.8 kg/m2)
    Panel Joint Panel joints must be at minimum of 100mm overlapped
    Panel End Panel end holding must not exceed 300mm from end mullion
  • DML 85L/B

    Panel Size 85mm effective width
    Thickness 0.4mm aluzinc panel
    (gross wt: 4.3 kg/m2)

    0.5mm aluminium panel
    (gross wt: 1.8 kg/m2)

    Panel Joint Panel joints must be at minimum of 100mm overlapped
  • DML 85L/U

    Panel Size 85mm effective width
    (0.5mm thick x 15mm (W) x 10mm (D) Aluminium flush infill)
    Thickness 0.4mm aluzinc panel
    (gross wt: 4.6 kg/m2)

    0.5mm aluminium panel
    (gross wt: 1.9 kg/m2)

    Panel Joint Panel joints must be at minimum of 100mm overlapped
  • CARRIER

    Carrier Size 35mm (W) x 35mm (D) x 4880mm (L)
    (maximum carrier interval spacing must not exceed 900mm c/c)
    (for louvres cladding’s height above 10 metre, the maximum carrier spacing must not exceed 500mm c/c. Carrier must be revered to the hollow section mullion with revert interval at 600mm apart)
    Thickness 0.7mm thick galvanized steel carrier
  • SUSPENSION

    Type of Suspension 14 gauge G.I. wire hanger
    (by installer)
    (recommended maximum carrier spacing at 1200mm centre to centre)
    Thickness 0.5mm G.I. bracing
  • EDGE & CORNER FINISHED

    Detail 0.4mm thick aluzinc L angle
    (with colour to match)