Skip to main content

Ventilation Louvres

Ventilation Louvres DML 80S

  • TOUGH & EXTREMELY DURABLE
  • DOES NOT CONTORT UNDER INTENSE HEAT
  • EASY TO MAINTAIN

PRODUCT DESCRIPTION OF VENTILATION LOUVERS

(DML 80S)

  • S shape profile panel
  • Light weight component
  • Clip on bracket system
  • Durable with minimum maintenance required
  • Applicable for both interior & external designs
  • Concealed bracket non visibility of marks on panels
  • Available in aluminium and galvanized steel finishes
  • Available in aluminium finishes
  • Deflection & bleeding stresses at design wind velocity of 35m/s or 126km/hour
  • Standard polyester coated colours

MATERIAL SPECIFICATION

  • PANELS

    95mm effective width Standard spacing from panel to panel is 90mm
    0.55mm thick aluminium panel 2.0mm thickness x 65mm width x 65mm depth aluminium
    (maximum carrier interval spacing must not exceed 1200mm c/c)
    Maximum length fixing at 0.3m centre to centre to be supported by main structural frame Maximum bracket spacing must not exceed 900mm centre to centre for height above 10m
  • DML 80S

    SPECIFICATION DML80S pre-painted material (aluminium) Ventilation Louvres comprising of S-shape panel 95mm effective width x thickness aluminium 0.55mm thick panel; panel centre to centre is standard spacing or customs spacing 90mm height; inclusive of aluminium bracket of 2.0mm thick fixed onto approved framing support of hollow section (supply by others) spacing maximum 1200mm centre to centre and all fixed accordance to manufacturers instruction.